Operating Instructions Dräger FG7000
11.2 Data memory functions
Selectable functions are:
Measurement data:
Info:
Inspector table:
Delete measurements:
Delete customers:
11.3 Measurement data
The measurements are saved with date and time and system number,
if allocated.
Select calls up the measurement results display.
From there, the allocated system is shown and the measurement result
can be printed with system and inspector.
11.4 Data storage information
The information about the data memory shows the number of saved
customers and measurements and the total number of occupied stor-
age locations.
Depending on the type, one measurement occupies 1 – 11 storage lo-
cations.
25
Saved measurement data indicates
Data storage information
Viewing and editing the inspector table
Delete measurement data storage
Delete all customer data
5695061
Edition 01 – April 2016
en