Recovering A Lost Ip Configuration - Newport XPS-RL Quick Start Manual

XPS-RL
EDH0367En1021 — 12/17
Check with your IT department that the lease time set at the DHCP is longer than the
time you plan to leave the XPS-RL switched off otherwise you will lose your dynamic
address and will need to connect to the REMOTE to know the new assigned one by the
DHCP.
Do not use Dynamic IP configuration if your DHCP server uses Windows NT 4.0
2.5.6

Recovering a lost IP configuration

If you want to recover a lost IP configuration, you need to connect the PC directly to the
REMOTE connector at the back of the XPS-RL with the gray cross-over cable.
NOTE
Figure 10: Direct connection to the XPS-RL
using a cross-over cable and the REMOTE connector.
14
Quick Start