Registering The Remote Machine - Ricoh Type M12 Field Service Manual

• If an error message is displayed, check the network connection with the client-side machine
and make sure that the IP address of the client-side machine is correct.
7. Press [OK] after "Connection Test" has been successfully done.
8. Presss [User Tools/Counter] key on the operation panel to terminate the System Settings.

Registering the Remote Machine

• First register the Client-side Machine in the Remote Machine before proceding this procedure.
Otherwise, registering the Remote Machine fails.
• Only one machine can be registered as the Remote Machine.
On the Client-side Machine(s):
1. Press the [User Tools/Counter] key on the operation panel
2. Press [System Settings].
3. Press [Administrator Tools].
Fax Connection Unit Type M12
37