Ricoh Type M12 Field Service Manual page 132

4. Service Tables
0 Not used
Optional G3 unit (G3-2)
1 0: Not installed
1: Installed
2 Not used
Select PSTN connection
3 0: Off
1: On
4-7 Not used
No
SEP reception
0 0: Disabled
1: Enabled
SUB reception
1 0: Disabled
1: Enabled
PWD reception
2 0: Disabled
1: Enabled
3-4 Not used
PSTN dial-in routing setting
5 0: OFF
1: ON
6 Not used
130
Do not change the settings.
Change this bit to 1 when installing the first optional G3
unit.
This switch enables the G3-2.
0: Off, no connection
1: Recognizes and enables G3-2.
This switch can be used only after G3-2 has been
installed.
Do not change the settings.
Communication Switch 17 (SP No. 1-104-024)
Function
0: Polling transmission to another maker's machine using
the SEP (Selective Polling) signal is disabled.
0: Confidential reception to another maker's machine
using the SUB (Sub-address) signal is disabled.
0: Disables features that require PWD (Password) signal
reception.
Do not change the settings.
1: The machine sets multiple PSTN dial-in numbers in the
PSTN dial-in line and transfers received data from each
PSTN dial-in number to each address.
Do not change the settings.
Comments