Revision Lists Version Details Initial release of this document 1.00 Created this manual for D76/D177 series. Revised all sections according to the release of 1.10 D197 series Modified some parts name. Read This First > Safety and Revised some icons. Symbols •...
Safety and Symbols This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations are as follows: Clip ring Screw Connector Clamp Short Edge Feed Long Edge Feed [A] Short Edge Feed (SEF) [B] Long Edge Feed (LEF) Trademarks ®...
TABLE OF CONTENTS Revision Lists................................1 Safety and Symbols............................2 Trademarks..............................2 1. Replacement and Adjustment Paper Sensor...............................5 Controller Board...............................10...
1. Replacement and Adjustment Paper Sensor Open the right cover. Main power switch cover [A] ( ×1, hook×3). • The main power switch cover has three tabs: two on the left side (paper exit) and one on the right side (right cover). Paper exit tray [A].
Page 8
1. Replacement and Adjustment Left upper cover [A] ( ×1). Left rear cover [A] ( ×2, hook×1). Cover [A]. • Remove this carefully in accordance with the notes described below.
Page 9
Paper Sensor • Do not twist the cover to remove the cover as shown below. Otherwise, some hooks inside the cover may be broken. • Lift up the cover vertically to remove the cover as shown below.
Page 10
1. Replacement and Adjustment 1 bin tray [A] ( ×1). 1 bin tray unit [A] ( ×1, ×2).