Registering The Client-Side Machine(S) - Ricoh Type M12 Field Service Manual

4. Turn off the machine.
5. Remove the SD card from SD slot 2 (lower), and then keep it in a safe place (see "SD Card
Appli Move" in the field service manual for the mainframe).
6. Attach the SD-card slot cover, and then turn on the machine (
7. Turn on the machine.
8. Press [Firmware Version] in the [Administrator Tools].
• [User Tools/Counter] > [System Settings] > [Administrator Tools]
9. Check whether the aics version is displayed.

Registering the Client-side Machine(s)

• Do not register the Remote Machine in the Client-side machine before the Client-side Machine is
registered in the Remote Machine. Otherwise, registering the Remote Machine fails.
On the Remote Machine:
1. Press the [User Tools/Counter] key on the operation panel.
2. Press [System Settings].
3. Press [Administrator Tools].
Fax Connection Unit Type M12
x 1).
35