Ricoh Type M12 Field Service Manual page 123

Page separation
2 0: Enabled
1: Disabled
Printing the sample image on reports
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
5-6 Not used
Equalizing the reduction ratio among
separated pages
(Page Separation)
7
0: Enabled
1: Disabled
* This setting can be used for the client-side machine which has no FCU.
No
Setting
The upper half only
50% reduction (sub-scan
only)
Same size
Not used
Printer Switch 0F (SP No. 1-103-016)
Function
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a cassette,
the machine automatically prints the fax
message.
"Same size" means the sample image is printed
at 100%, even if page separation occurs.
User Parameter Switch 19 (13H) bit 4 must be
set to "0" to enable this switch.
Refer to Detailed Section Descriptions for more
on this feature.
Do not change the settings.
0: When page separation has taken place, all
the pages are reduced with the same reduction
ratio.
1: Only the last page is reduced to fit the
selected paper size when page separation has
taken place. Other pages are printed without
reduction.
Comments
Bit Switches - 2
121