Removal And Reinstallation Of The Front; Cover - Mitsubishi Electric F800-E Series Instruction Manual

2.2
Removal and reinstallation of the front cover
Removal of the front cover (lower side)
(a)
(a) Remove the mounting screws to remove the front cover (lower side). (The number of the mounting screws differs by the
capacity.)
(b) With the front cover (lower side) removed, wiring of the main circuit terminals can be performed.
Removal of the front cover (upper side)
(a)
(a) With the front cover (lower side) removed, loosen the mounting screws on the front cover (upper side). These screws cannot be
removed.
(b) While holding the areas around the installation hooks on the sides of the front cover (upper side), pull out the front cover (upper
side) using its upper side as a support.
(c) With the front cover (upper side) removed, wiring of the control circuit and the RS-485 terminals, and installation of the plug-in
option can be performed.
(b)
Loosen Loosen Loosen
Removal and reinstallation of the front cover
(b)
(c)
INSTALLATION AND WIRING
2
15