Download  Print this page

Mitsubishi Electric F800-E Series Instruction Manual Page 17

Separated converter type.
Hide thumbs

Advertisement

Removal and reinstallation of the front cover
Reinstallation of the front covers
(a)
(a)
Insert the upper hooks of the front cover (upper side) into the sockets of the inverter.
Securely install the front cover (upper side) to the inverter by fixing the hooks on the sides of the cover into place.
(b)
Tighten the mounting screw at the lower part of the front cover (upper side).
(c)
Fasten the front cover (lower side) with the mounting screws. (The number of the mounting screws differs by the capacity.)
NOTE
• Fully make sure that the front covers are installed securely. Always tighten the mounting screws of the front covers.
16
INSTALLATION AND WIRING
(b)
Fasten
Fasten
Fasten
(c)
Fasten
Fasten
Fasten

Advertisement

Table of Contents

   Also See for Mitsubishi Electric F800-E Series

Comments to this Manuals

Symbols: 0
Latest comments: