Removal And Reinstallation Of The Front; Covers - Mitsubishi Electric FR-F862 Instruction Manual

2.2

Removal and reinstallation of the front

covers

Removal of the front cover (lower side)
(a)
(a) When the mounting screws are removed, the front cover (lower side) can be removed. (The number of the mounting screws
differs by the capacity.)
(b) With the front cover (lower side) removed, wiring of the main circuit terminals can be performed.
Removal of the front cover (upper side)
(a)
(a) With the front cover (lower side) removed, loosen the mounting screws on the front cover (upper side). These screws cannot be
removed.
(b) While holding the areas around the installation hooks on the sides of the front cover (upper side), pull out the front cover using its
upper side as a support.
(c) With the front cover (upper side) removed, wiring of the control circuit and the RS-485 terminals, and installation of the plug-in
option can be performed.
(b)
Loosen Loosen Loosen
Removal and reinstallation of the front covers
(b)
(c)
INSTALLATION AND WIRING
2
15