7.4.3
Connection
Electrical connection diagram
The handheld handwheel is connected via a flange socket using the spiral connection cable.
You will find the order numbers for the recommended flange socket in Chapter Spare parts
and accessories (Page 149).
Note
If a connected handwheel triggers pulses while in the idle position or when there is only
minimal contact, connect it the opposite way round to what is stated on the label.
Swap:
The wires of terminal A with those of terminal /A
The wires of terminal B with those of terminal /B
PPU
Manual, 03/2013, 6FC5397-2DP40-3BA1
Connectable components
7.4 Electronic handwheel
147