Description - Siemens SINUMERIK 828D Manual

7.7 NX10.3
7.7.1

Description

Properties
Using this module, you can expand the performance of an axis grouping of the
SINUMERIK 828D CNC automation system. With an NX10.3 Numeric Control Extension, the
PPU is able to control up to 8 axes.
Type plate
The NX10.3 module type plate contains the following basic information:
Figure 7-45
Note
You might need to access the information provided on the side-mounted type plate after the
equipment has been mounted. Since the type plate is located on the right-hand side of the
housing, which is the side typically used to connect to the SINAMICS S120 module, we
recommend that you make a note of the serial number of the NX10.3 prior to assembly.
PPU
Manual, 03/2013, 6FC5397-2DP40-3BA1
NX10.3 type plate
Connectable components
7.7 NX10.3
203