Siemens SINUMERIK 828D Manual page 158

Connectable components
7.5 PP 72/48D PN
LED displays
For diagnostic purposes, the RJ45 sockets are each equipped with a green and a yellow
LED. This allows the following information on the respective PROFINET port to be displayed:
Table 7- 30
Name
Link
Activity
PROFINET address (S1)
The right logical address must be assigned to the I/O module for communication with PLC
I/O interface using the 10 bit DIP switch S1.
Table 7- 31
1
on
off
on
off
on
The device name consists of the PROFINET name and the device number: in the case of I/O
Note
A newly set PROFINET address will only come into effect after power OFF/ON.
The switch positions 9 and 10 guarantee the PROFINET functionality of the module and
must always be switched "on".
158
PROFINET ports LED displays
Color
Green
Yellow
Switch S1 settings
2 3 4 5
off off on off
off off on off
on on off off
on on off off
off on off off
modules, the 1st module is device number 9.
Status Meaning
Lit 100 Mbit link available
Off Missing or faulty link
Lit Sending or receiving
Off No activity
6 7 8 9 10
on on
off off off
off off off
off off off
off off off
off off off
Device name Meaning
pp72x48pn9 1st PP module
pp72x48pn8 2nd PP module
pp72x48pn7 3rd PP module
pp72x48pn6 4th PP module
pp72x48pn5 5th PP module
Manual, 03/2013, 6FC5397-2DP40-3BA1
PPU