Climatic And Mechanical Environmental Conditions; Ambient Conditions - Siemens SINUMERIK 828D Manual

3.2

Climatic and mechanical environmental conditions

3.2.1

Ambient conditions

Observing the ambient conditions
The controller is tested for compliance with the ambient conditions specified below. Fault-
free operation is only ensured if:
● These ambient conditions are maintained when storing, transporting and operating the
● Original components and spare parts are used. This applies in particular to the use of
● The equipment is correctly installed and commissioned.
Standard requirements
The SINUMERIK 828D system components meet the following standard requirements:
Long-term storage
Transport
Stationary operation
Assistance and support
Compliance with environmental requirements must be ensured during installation of the
complete system. Please contact your sales representative for assistance and support.
PPU
Manual, 03/2013, 6FC5397-2DP40-3BA1
equipment.
specified cables and connectors.
3.2 Climatic and mechanical environmental conditions
EN 60721-3-1
EN 60721-3-2
EN 60721-3-3
Application planning
39