Siemens SINUMERIK 828D Manual page 102

Connectable components
7.1 MCP 483C PN
Tension jacks
The machine control panel is mounted from the front in a rectangular cut-out and attached by
means of nine supplied tension jacks (0.5 Nm tightening torque).
Tension jacks are also available as a spare part (see Section: "Spare parts and accessories
(Page 111)").
Figure 7-4 Panel cutout of MCP 483C PN
MCP 483C PN dimension drawing
Figure 7-5
102
MCP 483C PN dimensions
Manual, 03/2013, 6FC5397-2DP40-3BA1
PPU