Siemens SINUMERIK 828D Manual page 114

Connectable components
7.1 MCP 483C PN
8. Place the cover
9. Fold and fasten the connecting cable
Proceed in the same way to install the second rotary switch.
Note
It is essential to use the correct tightening torques.
114
②
on the rotary knob and snap it into position.
①
O-ring
②
Cap
③
Arrow ring
④
Fastening nut
⑤
Rotary knob
⑥
Connection plug
⑦
Connecting cable
⑧
Terminal board
Figure 7-11 Installation of rotary switch
⑦
as shown in the figure on the right.
Detail diagram of the connector
Manual, 03/2013, 6FC5397-2DP40-3BA1
PPU