Siemens SINUMERIK 828D Manual page 90

Interface description
6.6 DRIVE-CLiQ
Cable specification for X100 - X102
Feature
Connector type
Cable type
Order number
Max. cable length
Blanking cover for DRIVE-CLiQ interface: Tyco, order no.: 969556-5
Note
Interfaces X100 to X102
The interfaces X100 to X102 of the PPU do not provide any 24 V supply voltage.
Consequently, no components, such as SME, can be connected here that must be supplied
with 24 V via DRIVE-CLiQ.
Additional references
Further information on the components in this section:
● SINAMICS S120 Control Units and Additional System Components Manual
● SINAMICS S120 Booksize Power Units Manual
● SINAMICS S120 Booksize Power Units with Cold Plate Manual
● SINAMICS S120 Combi Manual
90
Version
RJ45 socket with 180° cable outlet
MOTION-CONNECT
6FX2002-1DC00-1□□0
70 m
Manual, 03/2013, 6FC5397-2DP40-3BA1
PPU