Garmin G3X Touch Pilot's Manual page 236

Hazard Avoidance
Lightning Detector data provides lightning cell and strike information on the
PFD inset map (GDU 46X only) and navigation map using the lightning symbology.
Lightning strike symbols appear the same size for the first minute and gradually fade
away over the following two minutes.
The Lightning Detector operates in either Cell Mode or Strike Mode. When operating
in Cell Mode, the system displays clusters or cells of electrical activity. When operating
in Strike Mode, the system displays the approximate location of individual lightning
strikes.
NOTE: Lightning Detection settings made on the Map Page are similarly
reflected for the PFD inset map (GDU 46X only) if enabled.
Enabling/disabling Lightning Detection:
1) From the Map Page press the MENU Key.
2) Touch Set Up Map.
3) Scroll the tabs left or right if necessary.
4) Touch the Lightning Tab.
5) Touch
Or
1) From the Map Page, press the MENU Key.
2) Touch Lightning Detector to toggle on or off as desired.
Selecting a Lightning Detection mode:
1) From the Map Page press the MENU Key.
2) Touch Set Up Map.
3) Scroll the tabs left or right if necessary.
4) Touch the Lightning Tab.
5) Touch
desired.
216
under Lightning Detector Data On or Off as desired.
under Lightning Detector Mode and select Strike or Cell as
Garmin G3X Touch Pilot's Guide 190-01754-00 Rev. L