Flight Data Logging; Virb Video Input - Garmin G3X Touch Pilot's Manual

Additional Features

8.9 FLIGHT DATA LOGGING

The flight data logging feature automatically stores flight and engine data to an
SD card. Data is recorded to the SD card every second. A data file is created each
time the system is powered on with an SD card inserted, or each time an SD card is
inserted after power on. A 2 GB SD card can store over 1,000 hours of flight data or
up to 1,000 files (whichever comes first). The data files stored on the SD card have
an extension of .csv. This file format can be opened using a spread sheet application.
Garmin recommends using a 8 GB SanDisk
Data Logging must be enabled in Configuration Mode.

8.10 VIRB VIDEO INPUT

Configuring this feature allows the camera to be controlled
NOTE:
wirelessly. Viewing the video on the display requires a wired connection
to the video input on the back of the display.
The Video In Page is available from Menu > Tools > Video In, until it is setup to
display on the Page Navigation Bar.
Displaying/removing the Video In Page on the Page Navigation
Bar:
1) Press the MENU Key twice.
2) Touch Setup > Display.
3) In the Video Main Page field, touch Show or Hide.
280
®
Garmin G3X Touch Pilot's Guide
or Toshiba SD card.
®
190-01754-00 Rev. L