Garmin G3X Touch Pilot's Manual page 148

CNS Interface
t
elephone auDio
The Telephone Audio button allows enables/disables the telephone's audio to the
intercom system for both the wired and Bluetooth telephone connections.
Button Status Description
Enabled (Green)
Disabled (Gray)
128
Wired Connection: The audio of the telephone
is connected to the intercom and the pilot may
participate in existing calls. Controlling the call
Telephone
(i.e., answer/hang up) is not supported, the ringing
audio is
of an incoming call may be heard but the actual
active (i.e.,
phone must be used to answer (and end) the call.
connected
to the
Bluetooth Connection: The ringing of an incoming
intercom).
call may be heard via the intercom, and the pilot
may ignore/answer/end the call via the provided
GDU controls.
Wired Connection: Telephone operations are not
supported via the intercom, and there are no
indications of incoming or existing calls.
Bluetooth Connection: The ringing of an incoming
call and the audio of an existing call are not heard
Telephone
via the intercom. The GDU provides an indication
audio is not
of an incoming call via the Data Bar's audio panel
active (i.e.,
button (flashing "TEL" indicator) and the Audio
connected
Panel page to allow the pilot to answer it - which
to the
automatically transitions "Telephone Audio" to
intercom).
enabled.
Also, the Audio Panel page provides an indication
of an existing call (via "Call Active") allowing the
pilot to join in the call via the intercom by enabling
"Telephone Audio".
Garmin G3X Touch Pilot's Guide
Connection Description
190-01754-00 Rev. L