Trim And Flap Position Indicators (Optional); Turn Rate Indicator - Garmin G3X Touch Pilot's Manual

TRIM AND FLAP POSITION INDICATORS (OPTIONAL)

When Elevator Trim, Aileron Trim, Rudder Trim, or Flap Position indicators are
configured, the indications can be optionally displayed on the PFD in addition to the EIS
Page. Refer to the G3X Touch Installation Manual for more information.
Flap Position
Manually displaying the trim/flap position indicators:
1) With the full screen PFD displayed, press the MENU Key.
2) Touch More Options....
3) Touch Trim/Flap Position.

TURN RATE INDICATOR

The Turn Rate Indicator is located above the HSI. Tick marks to the left and right of
the displayed heading denote 1/2 standard turn and standard turn rates (3 deg/sec). A
magenta Turn Rate Indicator shows the current turn rate. The end of the trend vector
gives the heading predicted in 6 seconds, based on the present turn rate. A standard-
rate turn is shown on the indicator by the trend vector stopping at the standard turn
rate tick mark, corresponding to a predicted heading of 18˚ from the current heading.
At rates greater than 4 deg/sec, an arrowhead appears at the end of the magenta
trend vector and the prediction is no longer valid.
190-01754-00 Rev. L
Elevator Trim
Indicator
Indicator
Trim and Flap Position Indicators
Garmin G3X Touch Pilot's Guide
Flight Instruments
Aileron Trim
Indicator
Rudder Trim
Indicator
77