Accessing Additional Information; Viewing Gps Receiver Status - Garmin G3X Touch Pilot's Manual

• NDB (Non Directional Beacons)—identifier, facility, type (symbol), bearing,
distance, and frequency.
• INT (Intersection)—identifier, bearing, and distance.
• VRP (Visual Reporting Point) (Atlantic)—identifier, bearing, and distance.
• USR (User Waypoints)—name, bearing, and distance.
• CTY (City)—name, bearing, and distance.
• ATC (Air Route Traffic Control Center)—name, bearing, distance, and frequency.
• FSS (Flight Service Station)—name, bearing, distance, frequency, and VOR (if
applicable).
• ASPC (Airspace)—name, time to entry (when applicable), and status.

1.7 ACCESSING ADDITIONAL INFORMATION

NOTE: A System Status Message and the word 'External' appearing next to
the GPS Status indicates that the display connected to the GPS antenna is
unavailable and the remaining display(s) are using the external GPS navigator
for 2D GPS position data. In this case, the data collected from the external
navigator is not considered a sufficient source of GPS data by the AHRS.

VIEWING GPS RECEIVER STATUS

Internal system checking is performed to ensure the GPS receiver is providing
accurate data to the GDU(s).
The G3X Touch GDUs can be configured to share GPS information (refer to the G3X
Touch Installation Manual for configuration information). For example, a GDU can be
configured to share its GPS position, velocity, and time data with another GDU. If a
GDU is not using its own GPS receiver, the name of the GDU providing the data (i.e.,
'3D GPS Location (PFD)' or '3D GPS Location (MFD)') is displayed on the INFO Page.
190-01754-00 Rev. L Garmin G3X Touch Pilot's Guide
System Overview
31