Garmin G3X Touch Pilot's Manual page 268

Hazard Avoidance
Enabling/disabling Flight ID Display:
1) From the Traffic Page, press the MENU Key.
2) Touch the Flight ID.
M v
otion eCtorS
There are two pilot-selectable and mutually exclusive types of motion vectors, Absolute
and TargetTrend, which are differentiated by color and function. Absolute vectors are
white and indicate ground track as reported by the traffic. TargetTrend vectors are green
and indicate the flight path and position, relative to your aircraft, at which the traffic
will be after the passing of one of four predetermined look-ahead intervals. The end of
the TargetTrend vector indicates the traffic's predicted location relative to your predicted
location at the end of the look-ahead time. For example, if traffic is ahead of you and
traveling along the same track but at a slower rate, the motion vector would point
opposite of its indicated direction of flight showing that you are overtaking the traffic.
The TargetTrend look-ahead time interval is automatically adjusted from 30 seconds to
five minutes and corresponds to the traffic display range setting. The greater the range
setting, the longer the time interval and vise versa. Refer to the table below for more
details.
Traffic Page Range Ring Settings
.5nm to 2nm
2nm to 6nm
6nm to 12nm
12nm to 40nm
248
TargetTrend Look-ahead
Garmin G3X Touch Pilot's Guide
TargetTrend Look-ahead
30 seconds
60 seconds
2 minutes
5 minutes
190-01754-00 Rev. L