Parameters And Programming - Parker TWIN-N Series User Manual

Parker Hannifin S.p.A. Divisione S.B.C.

6 PARAMETERS AND PROGRAMMING

The torque, speed, acceleration and position control functions are carried out by special digital
electronics.
In this section we explain how parameters are set and the meaning of each parameter. We also
provide the functional block diagram and the description of advanced functions. The system is easy
to use and flexible.
In the diagram below the general block diagram of the part of the converter that is controlled by
parameters is presented.
analogue
digital REFERENCE
internal MANAGEMENT
SPEED
WINDOW
TORQUE
CONTROL
The main block diagram and the diagrams for special functions (operating modes) are described later
in more detail.
How to associate inputs/outputs to the parameters of the converter is described in the chapter, The
pico-PLC .
The parameters are divided on the basis of their function in the following way.
57
b40.2
LIMIT SWITCH
&
STOP
OPERATING
MODE
Pr31
DIGITAL
LOCK
and
POSITIONER
SPEED
REGULATOR
TORQUE
LIMIT
MANAGEMENT
ALARMS
MANAGEMENT
DOUBLE
ELECTR.
ELECTR.
CAM
CAM
user's manual TWIN-N and SPD-N
REAL TIME
CAN
TORQUE
DEMAND