Mounting Air Flow Station Unit - Omron EQUO Series User Manual

3.7.2 Mounting Air Flow Station Unit

Important
Use screws to fix the product through the provided mounting screw holes for installation
on the wall or other equipment where vibration or shock may directly affect the unit.
(1) Free-stand Installation
Important
When placing the product on a desk or other similar location, place it at a sufficient
distance from the edges or corners of the object to prevent the unit from dropping to be
damaged. Take caution in handling the connection cable and LAN cable to avoid their
contacting the unit.
(2) Securing with Mounting Screws
Mounting screw holes are provided on the rear side of the unit, which enables fixing the unit
on the wall or other vertical surface.
The holes also can hold round mounting magnets to magnetically secure the unit.
(Refer to the Appendix: Installation Diagram for the screw hole dimensions.)
Important
The screw holes are 4 mm deep. Do not screw deeper than 4 mm, which may damage
the product.
M3 Screws: x 6
3-28
3. Check and Preparation