Advertisement
Photoelectric sensor with anti-tampering in compact plastic housing
E3Z-H
• Compact housing size and high power LED for excellent
performance-size ratio
• IP67 and IP69K for highest water resistance
• Intensive shielding for highest noise immunity (EMC)
• No adjusters to protect against manipulation
• Rugged PBT housing for high mechanical resistance
Ordering Information
Sensor type
Sensing
distance
Through-beam
15 m
Retro-reflective with
0.1 to 4 m
M.S.R.
Diffuse-reflective
0.1 m (adjustable) NPN
wide-beam
Diffuse-reflective
1 m (adjustable)
*1.
Measured with E39-R1S. The reflector is sold separately.
Reflectors (Order seperately)
Name
Sensing distance (typical)
Reflectors
3 m [100 mm]
4 m [100 mm]
5 m [100 mm]
6 m [100 mm]
4 m [100 mm]
1.5 m [50 mm]
Tape Reflector
700 mm [150 mm]
1.1 m [150 mm]
1.4 m [150 mm]
*1.
Values in parentheses indicate the minimum required distance between the sensor and reflector.
E3Z-H
Output
Connection method
configuration
NPN
PNP
*1
NPN
PNP
PNP
NPN
PNP
*1
Size in mm
60x40
60x40
Ø84
100x100
50x50
35x20
35x10
35x40
80x70
Model
E3Z-T61H 2M
E3Z-T66H
E3Z-T81H 2M
E3Z-T86H
E3Z-R61H 2M
E3Z-R66H
E3Z-R81H 2M
E3Z-R86H
E3Z-D61H 2M
E3Z-D66H
E3Z-D81H 2M
E3Z-D86H
E3Z-D62H 2M
E3Z-D67H
E3Z-D82H 2M
E3Z-D87H
Model
E39-R1
E39-R1S
E39-R7
E39-R8
E39-R42
E39-R3
E39-RS1
E39-RS2
E39-RS3
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Omron E3Z-H
Summary of Contents for Omron E3Z-H
- Page 1 1.5 m [50 mm] 35x20 E39-R3 Tape Reflector 700 mm [150 mm] 35x10 E39-RS1 1.1 m [150 mm] 35x40 E39-RS2 1.4 m [150 mm] 80x70 E39-RS3 Values in parentheses indicate the minimum required distance between the sensor and reflector. E3Z-H...
- Page 2 Protective cover bracket E39-L144 Vertical protective cover bracket Note: 1 . If a through-beam model is used, order two Mounting Brackets for the emitter and receiver respectively. 2 . For details, refer to the "Mounting bracket list". Sensor I/O Connectors Size...
- Page 3 30 mA max. receiver: 20 mA Control output Load power supply voltage 26.4 VDC max., load current 100 mA max. (residual voltage 2 V max.) Open collector output type (depends on the NPN/PNP output format), Light-ON/Dark-ON selectable by wiring Protective circuits...
- Page 4 Distance vs. Size Diffuse-reflective Diffuse-reflective E3Z-D#1H(D#6H) E3Z-D#2H(D#7H) White paper SUS (glossy surface) SUS (glossy surface) White paper Black carbon Black carbon Side length (one side) of sensing object: d (mm) Side length (one side) of sensing object: d (mm) Standard Photoelectric Sensors...
-
Page 5: Output Circuit Diagram
Mode selector Through-beam emitter Brown Power indicator (orange) Connector Pin Arrangement Main 12 to 24 circuit Note: Terminal 2 and 4 are not used. Blue PNP output Output transis- Mode Model Timing chart Output circuit tor Status selection 12 to 24 VDC... - Page 6 2-M3 2-M3 Vinyl-insulated round cable with two conductors, 4 dia. Vinyl-insulated round cable with three conductors, 4 dia. (0.2 mm ² with 1.1-dia. insulator); standard length: 2 m (0.2 mm² with 1.1-dia. insulator); standard length: 2 m Trough-beam 12.45 Operation indicator...
-
Page 7: Safety Precautions
This Sensor is equipped with load short-circuit protection, but be Modifications sure to not short circuit the load. Be sure to not use an output cur- Do not attempt to disassemble, repair, or modify the Sensor. rent flow that exceeds the rated current. If a load short circuit oc-... - Page 8 This is not intended to be an exhaustive list OMRON shall not be responsible for the user’s programming of a pro- of all possible uses of the products, nor is it intended to imply that the grammable product, or any consequence thereof.
Need help?
Do you have a question about the E3Z-H and is the answer not in the manual?
Questions and answers