Table of Contents
Advertisement
2.2
Arduino Shield Sockets Note
The Intel® Quark™ Microcontroller D2000 Development Platform supports the familiar
open standard Arduino Uno Rev 3.0 physical interface and is mechanically compatible
with Uno Rev 3.0. It does not support the 6 pin ICSP Header.
Each functional I/O can be configured to provide the same function that is supported
on the Arduino Uno Rev 3.0 with the exception of the PWM capability, which can only
be supported on IO6 and IO9. The developer platform supports 3.3V IO operation only
and is not 5V tolerant. VIN Pin is not supported.
The purpose of supporting the Arduino Uno Rev3.0 form factor is to enable rapid
hardware prototyping through leveraging the existing ecosystem of 3.3v Arduino
Shields or the Arduino compatible prototyping shields. Software compatibility of any
Arduino shield is not assumed and would be the responsibility of the developer to
produce the appropriate code.
May 2017
Document Number: 333966-006EN
Intel® Quark™ Microcontroller Developer Kit D2000
User Guide
9
Advertisement
Table of Contents
