Vertical Mounting Standard Rail - Siemens SIMATIC IPC127E Operating Instructions Manual

Mounting and connecting the device
3.2 Mounting the device
3.2.5

Vertical mounting standard rail

Upright mounting on a standard rail is suitable for vertical mounting of the device. The
corresponding mounting bracket allows mounting that requires less space than wall
mounting.
Requirement
● Mounting bracket
Note
Only use the supplied screws for fastening the mounting bracket. Longer screws can
damage the inside of the device.
● A T10 screwdriver
● Two anchors and two screws
Procedure – Vertical mounting standard rail
30
1. Place the mounting bracket on the rear of
the device.
2. Fasten the mounting bracket with the two
supplied screws.
3. Place the device with the mounting brack-
ets onto the mounting rail.
Operating Instructions, 01/2019, A5E44296915-AA
SIMATIC IPC127E