Fcc (Usa) Compliance; Canada - Siemens SIMATIC IPC127E Operating Instructions Manual

Certificates and approvals

7.4 FCC (USA) compliance

7.4 FCC (USA) compliance
USA
Federal Commu-
nications Commis-
sion
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
Responsible party for Supplier's Declaration of Conformity
Siemens Industry, Inc.
Digital Factory - Factory Automation
5300 Triangle Parkway, Suite 100
Norcross, GA 30092
USA
mailto: amps.automation@siemens.com
7.5

Canada

CANADA
Canadian Notice
Avis Canadien
60
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the inter-
ference at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
(mailto:
This Class B digital apparatus complies with Canadian ICES-003 (B).
Cet appareil numérique de la classe B est conforme à la norme NMB-003
(B) du Canada.
amps.automation@siemens.com)
Operating Instructions, 01/2019, A5E44296915-AA
SIMATIC IPC127E