Table of Contents
Advertisement
2.3.4 Principal machine of extruder
The principal machine is the core of whole extruder system, and generally consists of main motor,
guard, machine stand, bearing pedestal, off-product bypass, support bracket, extrusion barrels, discharge
device, cutting device and pipeline rack. See Fig.2-8.
1.Motor
base
6 .Extrusion barrel 7.Cutting device 8.Suspension rod 9. Beam 10.Off-product bypass 11.Bearing
box
12.Guard
2.3.5 Pipeline system
Single-screw extruder system is generally in need with a pipeline support system which has three
forms: full-automatic control system, semi-automatic control system and manual control system.
The pipeline system equipped for this single-screw extruder: MYGL215_1 pipeline system,
MYGL215_2 pipeline system, and MYGL215_3 pipeline system are corresponding to full-automatic
control system, semi-automatic control system and manual control system, respectively.
2.Main motor 3.Principal machine stand 4.Pipeline rack
Fig.2-8 Principal machine of extruder
18
5 .Support bracket
Advertisement
Table of Contents
