Principal Machine Of The Extruder - Famsun MY265 Operation Manual

(2)Good forming performance
Because steam and water is applied in the process, the feed mash for extrusion is of high moisture
content offering good forming performance with good finished product quality.
(3)Low wearing of extruder parts
The ripen materials with advantageous corresponding temperature and curing degree do not require
the cooking process at high pressure or frictional force in the extruder barrels. In addition, high
moisture can play a part in lubrication. Such benefits can greatly reduce the fretting wear, thus to
increase the service life of the barrels and screw heads.
(4)Widened production scope
Improved physical properties of feed mash provided by the cooking process allow the extruder to
make more extensive products.
[Note]

The angles of all paddles of the conditioner have been adjusted to the proper
positions at our shop according to the properties of the normal materials. Therefore,
unauthorized adjustment is not recommended for common materials.
If it is necessary to adjust the angles of conditioner paddles, please contact FAMSUN

Service Center for support.

2.3.4 Principal machine of the extruder

The principal machine is the core of whole extruder system and generally consists of main
motor, guard, machine stand, bearing pedestal, off-product bypass, support bracket, extrusion barrels,
discharge device, cutting device and pipeline rack. See Fig.2-7.
.
1.Main motor 2.Guard
7.Extrusion barrel 8 Discharge device
3.Machine stand 4. Bearing pedestal
9.Cutting device
Fig.2-7 Principal machine of extruder
5. Off-product Bypass 6.Support bracket
10.Pipeline rack
18