Famsun Muyang SJPS215 Operation Manual page 2

Foreword
1. Thanks for purchasing Muyang SJPS215 Single-Screw Extruder.
2. This Operation Manual is an important technical document for safe and correct operation of SJPS215
Single-Screw Extruder.
3.Prior to operation, please read this operation manual carefully and get to know the safety instructions,
performances, requirements for installation and operation etc. of this extruder in order to adroitly operate
and use this machine, therefore to create more benefits.
4. This machine must be operated in accordance with this Manual. Improper operation or breach of the
operation regulations will cause severe loss.
5. Following are Safety-Alert Symbols and signal words in this Manual.
6. Prior to use, please read through this Manual and well understand the signal words, especially the
DANGER ones.
7. Operation and maintenance personnel should read this Operation Manual carefully before they carry
out the operation and maintenance of the equipment.
8. Keep the Manual in a place near the machine, so as to look it up at any moment.
9. Please operate and maintain this machine with thorough understanding of this Operation Manual.
10. Please contact our Company to purchase a new Operation Manual for this machine if the Manual is
missing or damaged.
11. If the machine is transferred to the third party, please pass this Manual along with the machine.
12. Attention, Following are some explanations about the application and the warranty of this machine.
① Application: Extrusion of powdery and granular materials.
② Warranty item: Extruder body
③ Warranty period: within 1 year after purchase of the equipment, except wearing parts.
[Note]:
(1)Jiangsu Muyang Holdings Co., Ltd reserves the copyright of this document and related contents. The
recipient of this Manual shall recognize the copyright and shall not provide the document wholly or
partially to the third party without Muyang's authorization in writing beforehand, and shall not use it for
other purpose.
(2) No further notification shall be given should the relative technologies and the parameters change.
(3)The foreign language version of this Operation Manual is translated based on the Chinese version of
this Operation Manual of Jiangsu Muyang Holdings Co., Ltd, therefore, in case of divergence, the
Chinese version of this Operation Manual shall govern.