Table of Contents
Advertisement
Imaging Plane
Figure 2. Imaging plane of 8809
General Information
Product specifications for this transducer can be found in the Product Data Sheet
that accompanies this user guide.
Acoustic output data and data about EMC (electromagnetic compatibility) for this
transducer are in Technical Data (BZ2100) that accompanies this user guide. A full
explanation of acoustic output is given in your scanner user guide.
Service and Repair
6
WARNING GS-w2
If at any time the system malfunctions, or the image is severely distorted or degraded, or
you suspect in any way that the system is not functioning correctly:
Remove all transducers from contact with the patient.
•
Turn off the system. Unplug the system from the wall and make sure it cannot be used
•
until it has been checked.
Do not try to repair the system yourself.
•
Contact your BK Medical representative or hospital technician.
•
WARNING AO-w1
To avoid tissue damage, always keep the exposure level (the acoustic output level and the
exposure time) as low as possible.
WARNING SR-w1
Service and repair of BK Medical electromedical equipment must be carried out only by the
manufacturer or its authorized representatives. BK Medical reserves the right to disclaim all
responsibility, including but not limited to responsibility for the operating safety, reliability
and performance of equipment serviced or repaired by other parties. After service or repairs
have been carried out, a qualified electrician or hospital technician should verify the safety
of all equipment.
May 2019
8809 User Guide (BB0911-N)
Advertisement
Table of Contents
