Related Manuals for BK Medical Type 8506-S
Summary of Contents for BK Medical Type 8506-S
- Page 1 Endovaginal Endfire Transducer User Guide Types 8506-S and 8806 English BB1154-E August 2006...
- Page 2 If you receive an email message from us asking for your feedback, we hope you will be willing to answer some questions about your experience buying and using our products. Your opinions are important to us. You are of course always welcome to contact us via your BK Medical representative or by contacting us directly.
-
Page 3: Table Of Contents
Endovaginal Endfire Transducer Types 8506-S and 8806 Introduction Scanning Plane General Information Caring for the Transducer Cleaning and Disinfection Starting Scanning Connecting the Transducer Changing Frequency Using a Transducer Cover Changing Orientation Puncture Facilities Puncture Attachment UA1263 Performing Puncture and Biopsy Endovaginal Biopsy Cleaning after Puncture and Biopsy Disposal... -
Page 5: Introduction
Endovaginal Endfire Transducer Types 8506-S and 8806 Endovaginal Endfire Transducer Types 8506-S and 8806 Introduction This is the user guide for the Endovaginal Endfire Transducers Types 8506-S and 8806, and must be used together with Transducer Care, Cleaning & Safety which contains important safety information. -
Page 6: General Information
8506-S and 8806 • General Information General Information Product specifications for this transducer can be found in the Product Data sheet that accompanies this user guide. Acoustic output data and data about EMC (electromagnetic compatibility) for this transducer are on the Technical Data CD that accompanies this user guide. A full explanation of acoustic output is given in your scanner user guide. -
Page 7: Starting Scanning
8506-S and 8806 • Starting Scanning Starting Scanning All equipment must be cleaned and disinfected before use. Connecting the Transducer WARNING Keep all plugs and sockets absolutely dry at all times. The transducer is connected to the scanner using the array Transducer Socket on the scanner. -
Page 8: Puncture Facilities
8506-S and 8806 • Puncture Facilities Puncture Facilities Puncture and biopsy are possible with Types 8506-S and 8806. The puncture attachment is illustrated in the following pages with a brief description of its use and operating instructions. The use of probe sheaths during invasive applications is recommended. For hygiene reasons, the transducer should be enclosed in a transducer cover or a standard condom. -
Page 9: Performing Puncture And Biopsy
8506-S and 8806 • Performing Puncture and Biopsy Caution Ensure that the tip of the needle guide lies close to the front end of the probe, if not the needle guide may be damaged and require realignment by B-K Medical technicians. Caution Ensure UA1263 is positioned correctly. -
Page 10: Cleaning After Puncture And Biopsy
8506-S and 8806 • Disposal UA1263 Fig. 5. Illustration of puncture line for puncture attachment UA1263 WARNING When performing a biopsy, always make sure that the needle is fully drawn back inside the needle guide before moving the probe. Cleaning after Puncture and Biopsy If biological materials are allowed to dry on the transducer or puncture attachments, disinfection and sterilization processes may not be effective.