Assembling The Peripheral Constituents - SunStar SPS/E-BH3100 User Manual

4) Assembling the peripheral constituents

A. Atach the motor cover
using fixing bolts
B. Attach the safety plate to the back side of the arm.
To prevent any accidents related to safety, be
sure to attach those while working.
Cautions
C. Install the thread stand ③ on the table.
D. Drive the head part supporting rod ④ into the table by
beating.
Drive the head part supporting rod ④
into the table by beating until its end
perfectly.
If it has not been driven until its end
Cautions
perfectly, it will be unsafe and danger
when the head part is lay down.
to the back side of the machine by
(4 EA).
Face Plate
Safety Plate
③
④
10
①
②
[ Fig. 3 ]
[ Fig. 4 ]
[ Fig. 5 ]