SunStar SPS/E-BH3100 User Manual page 6

1-4) Machine Operation
Warning
1-5) Devices for Safety
Notice
SPS/E-BH3100 Series is made to sew button hole on fabrics and other similar material for
manufacturing.
Follow the following indications when operating the machine.
ⓐ Read through this manual carefully and completely before operating the machine.
ⓑ Wear the proper clothes for work.
ⓒ Keep hands or other parts of the body away from the machine operation parts (needle,
hook, thread take-up lever, cutter and upper thread trimmer mes etc.) when the machine
is being operated.
ⓓ Keep the covers and safety plates on the machine during operation.
ⓔ Be sure to connect the earthing conductor.
ⓕ Close down the electric motive power and check if the switch is turned "off"before opening
electric boxes such as the control box.
ⓖ Stop the machine before threading the needle or checking after work.
ⓗ Do not step on the pedal when turning the power on.
ⓘ Do not insert multiple motor plugs into one electric outlet.
ⓙ If possible, install the machine away from source of strong electrical noise such as high
frequency welding machines
Be careful when the presser foot comes down to press. Otherwise, the finger or hand
might be hurt at smacking.
ⓐ Safety label : It describes cautions duing operating the machine.
ⓑ Thread take-up cover : It prevents from any contact beween body and take-up lever.
ⓒ Motor cover: It is a protective device against potential accidents which might occur during
motor's rotation.
ⓓ Finger guard : It prevent from contacts between a finger and needle.
ⓔ Safety plate : It protects eyes against needle breaks.
ⓑ
ⓐ
ⓔ
ⓓ
5
ⓒ