Omron RX2 Series User Manual page 109

Go To
Command
Jumps to <label> unconditionally.
Note 1. This command must be connected to the command that is executed next. This is necessary to clarify
the program flow.
2. To set the label name in flowchart, right-click the command and select [Set Label] from the menu. You
can specify any name.
 Example
Block number
1 If U(00) is 1, it jumps to the block 3: Condit_True. If U(00) is 0, it goes to the next block 2.
2 Jumps to the block 1: Ini unconditionally.
3 Adds 1 to U(01).
4 Jumps to the block 1: Ini unconditionally.
DriveProgramming User's Manual (I622-E1)
Description
Flowchart method
goto
→
↓
Flowchart
6 DriveProgramming Commands
Label: a name that is used to identify a particu-
lar function block in the task.
Format
Text language method
goto <label>
Operation
Argument
Text
6 - 13
6