Interface Description Of Front Panel - Digisol DG-GS4900SE Series Installation Manual

LED Status
On
Green Off
Blink
The other is system LEDs, they are used to show the work status of the system at the
right of front panel.
Panel
Status
Symbol
On (Green)
PWR1
Off
On (Green, blink) System is loading
DIAG
On (Green)
On (Green)
PWR2
Off
On (Green)
MODE
Off
On
FAN
(DG-GS492
8HPSE2/52
Off
HPSE
supports)

1.4.4 Interface Description of Front Panel

DG-GS4900SE series switches provide RJ-45 1000Mb copper port, interface of
SFP+ 10Gb fiber transceivers and combo interface.
DG-GS4900SE Series Installation Guide
Table 1- 2Port LEDs
Description
On means ports are in the link state
of 10G, 1000M, 100M, 10M
Off means ports are not in the link
state of 10G, 1000M, 100M, 10M
Send or receive the data
Table 1- 3 DG-GS4900SE System LEDs
Description
Power1 is operating normally
Power1 is not operating
System is operating normally
Power2 is operating normally
Power2 is not operating
The mode is changed to be default
mode
The system mode is the default mode
The fan is working normally
The fan is working abnormally
11