Front Panel Port Description - Digisol DG-GS4600 SERIES Installation Manual

DIAG
1.3.3.3 PoE Indication Description
Button status
Button is not Show
pressed status
Button is Show port POE status
pressed
Table 1-7 DG-GS4628HP PoE indication description
LED
Green
PoE Flash(Green)
Off

1.3.4 Front Panel Port Description

Each port description is shown below:
Interface mode
RJ-45 port
SFP
Off
Green light
winks fast
Green light
winks slowly
Table 1-6 DG-GS4628HP Button description
Port LED status
port Link/Act
Status
Table 1-8 DG-GS4600 port description
Spec
•
10/100/1000Mbps auto negotiation
•
MDI/MDI-X cable mode auto negotiation
5 kinds of UTP: 100 m

Combo electrical port supports 10/100/1000Mbps auto

negotiation
SFP-SX-L transceiver

Power is off or error
Operating status is normal
System is in loading
POE LED
Not enabled
Enabled POE status
Description
Port is in power state.
POE is in maximum power state.
Port power is not supplied.
1-9
Introduction