Table 137: Show Mvr - Display Description; Table 138: Show Mvr Interface - Display Description - Digisol DG-FS4526E Management Manual

C 38 | Multicast Filtering Commands
HAPTER
Multicast VLAN Registration

Table 137: show mvr - display description

Field Description
MVR Config Status Shows if MVR is globally enabled on the switch.
MVR Running Status Indicates whether or not all necessary conditions in the MVR
environment are satisfied. (Running status is true as long as MVR
Status is enabled, and the specified MVR VLAN exists.)
MVR Multicast VLAN Shows the VLAN used to transport all MVR multicast traffic.
MVR Current Learned The current number of MVR group addresses
Groups
MVR Forwarding Priority Priority assigned to multicast traffic forwarded into the MVR VLAN
MVR Upstream Source IP The source IP address assigned to all upstream control packets.
MVR Group Range The multicast group addresses configured for this switch
The following displays information about the interfaces attached to the
MVR VLAN:
Console#show mvr interface
Port Type
-------- --------
Eth1/ 2 Source
Eth1/ 3 Source
Eth1/ 1 Receiver
Eth1/ 4 Receiver
Console#

Table 138: show mvr interface - display description

Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for source
ports is "ACTIVE" if MVR is globally enabled on the switch. MVR
status for receiver ports is "ACTIVE" only if there are subscribers
receiving multicast traffic from one of the MVR groups, or a
multicast group has been statically assigned to an interface.
Immediate Leave Shows if immediate leave is enabled or disabled.
Static Group Address Shows any static MVR group assigned to an interface, and the
receiver VLAN.
The following shows information about the interfaces associated with
multicast groups assigned to the MVR VLAN:
Console#show mvr members
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
– 996 –
Status Immediate
------------- ---------
Active/Up
Inactive/Down
Active/Up Disabled
Active/Down Disabled
Static Group Address
--------------------
225.0.0.1(VLAN1)
225.0.0.9(VLAN3)