Digisol DG-GS4900SE Series Installation Manual page 23

1. Insert one end of the power cable provided in the accessory kit into the power source
socket (with overload and leakage protection), and the other end to the power socket in
the back panel of the switch.
2. Check the power status indicator in the front panel of the switch. The corresponding
power indicator should light. DG-GS4900SE series is self-adjustable for the input voltage.
As soon as the input voltage is in the range printed on the switch surface, the switch can
operate correctly.
3. When the switch is powered on, it executes self-test procedure and startups.
Caution!
The input voltage must be within the required range, otherwise the switch can be
damaged or malfunction. Do not open the switch shell without permission. It can cause
physical injury.
This product comes with Life time warranty. For further details about
*
warranty policy and Product Registration, please visit support section of
www.digisol.com
DG-GS4900SE Series Installation Guide
23
*