Hypercom T4205 Dial Training Material page 29

Exhibit D: Enabling Manager Password
Option 2: Set Hard Coded Terminal Password
This option adds a hard coded password prompt to the terminal itself so
only users who input the correct password can even access the Load
Value screens. Follow the instructions below:
1. From the loyalty program main menu, press the down arrow and
select Setup Menu.
2. Select TERMINAL and when prompted, enter default Manager
Password of 92266831 and press Enter. If you already changed the
default Manager password, then enter the new password value here
instead of 92266831.
3. Select NEXT until you see ENABLE MANAGER PWD? Click EDIT
and observe value. The value should be set to 1 to enable the
password over Load Value functions or set to 0 to disable it. Press
the desired value on the keypad and select ENTER to save changes.
4. Select NEXT until you see MANAGER PASSWORD. Click Edit and
observe value. Change the default password to any combination of
digits you like that only authorized users will know. Press ENTER to
save changes.