Hypercom T4205 Dial Training Material page 25

Exhibit A: Connectivity
Switching Terminal Connectivity from Dial-Up to
Internet (or vice versa) on T4220 Dual Com
Launch the loyalty program by selecting LOYAL PATRON
at the root menu screen to access the loyalty main menu
where Record Sale, Balance Inquiry and Load Value
functions are displayed. Press the down arrow and select
Setup Menu.
Select TERMINAL and when prompted, enter default
Manager Password of 92266831 and press Enter. If you
already changed the default Manager password, then enter
the new password value here instead of 92266831.
Select NEXT once to display PRIMARY COMM LINK. Click
EDIT and observe value. The value should be set to 2 for
Ethernet (IP) processing or 1 for dialup processing. Press
the desired value on the keypad and select ENTER to save
changes.
Exit back to loyalty main menu and re-run a test transaction
to verify successful processing and receipt printing. If
problems persist, check cabling, try rebooting terminal and/
or router or call Technical Support for assistance.
PRIMARY COMM LINK PRIMARY COMM LINK
PREV
NEXT
EDIT