Hypercom T4205 Dial Training Material page 28

Exhibit D: Enabling Manager Password
Enabling Manager Password on Load Value Transactions
You have two (2) options for setting manager passwords to lock down
the Load Value function. Operators can elect one of the following
options or enable both for ultimate security.
Option 1: Manager / Administrator ID Validation
This option validates the Clerk ID entered by the employee has either
Manager or Administrator security clearance as setup in the Users
area of the back office. If the employee has Clerk clearance the Load
Value transaction will fail and return an error. Turn on this feature by
first enabling Clerk IDs as described in Exhibit C.
Once Clerk IDs are enabled, log into your account online, click your
Locations tab(s) and check the box for Require Manager
Password for Load Value. Verify BOTH checkboxes are enabled as
shown below.