Hypercom T4205 Dial Training Material page 26

Exhibit B: Dial Backup
Enabling or Disabling Dial Backup on T4220 Dual Com
If you intend to run a telephone line for auto dial-backup
(recommended) or wish to disable the auto dial backup
feature follow the procedures below to enable / disable the
function.
1. From the loyalty program menu, press the down arrow
and select the function Setup Menu.
2. Select Modem and when prompted, enter default Manager
Password of 92266831 and press Enter. If you already
changed the default Manager password, then enter the
new password value here instead of 92266831.
3. Press the NEXT button until you see DIAL BACKUP?.
4. Select EDIT. A value of 0 means the terminal will NOT
try to dial out to process a transaction if an Internet
connection cannot be located. A value of 1 means the
terminal will attempt to dial out through a telephone line
if an Internet connection cannot be located. Set desired
value of 0 (No Backup) or 1 (Backup Enabled) and
press ENTER to save changes.
$
DIAL BACKUP?
PREV
NEXT
EDIT