Technical Specifications; Ordering And Accessories - Danfoss EIM 336 Manual

Manual

Technical Specifications

Supply voltage
Power consumption
Input signals
For the EMC compliance, sensor cable length must be < 3m.
For longer sensor cable, the ferrite bead should be used.
EEV driver
EEV
Data communication
Environment
Dimensions
Operation
EMC
Approvals
RoHS
EMC
Ordering
Type
EIM 336
Accessories
Type /description
Connector kit for 5x EIM Controller
MYK - EIM interfacer*
* Please contact your local Danfoss supplier for required software
Related products
Pressure transducer
AKS 32R, NSK BExx
4
Superheat Controller EIM 336
Packaging
Single pack
Packaging
Single pack
Single pack
Temperature sensor
AKS 21, AKS 11
DKRCC.PS.RQ0.B7.02 /520H8832
24 V a.c./d.c. (+/-15%) Class II isolation
Idle Max 10 mA @ 24 V d.c.
Operating Max. 150 mA @ 24 V d.c.
Po AKS 32R (or similar ratiometric pressure transmitter)
S2 PT1000
S4 PT1000 or digital input from external contact.
Max current 150 mA
Uni- or bipolar coil.
RS485 – Modbus RTU
Storage: -34 °C to 71 °C (-30 °F to 160 °F )
Operating: -25 °C to 60 °C (-13 °F to 140 °F)
Humidity: <95% RH, non condensing
25 × 50 × 80 mm (0.98 × 1.97 × 3.15 inch)
Stand alone or via Modbus data communication
Immunity Class B – EN 55024
Emission Class A – EN 55022
Immunity Class B – EN 55024
Emission Class A – EN 55022
EN 61000 - 6 - 1: 2007
EN 61000 - 6 - 2: 2005
EN 61000 - 6 - 3: 2007 + A1: 2011
Code no.
080G1002
Code no.
080G1601
080G0073
Programming key / display
MYK - EIM interfacer
Electronic Expansion valve
ETS6
© Danfoss A/S (AC-MCI / sw), 2014-11