Table of Contents
Advertisement
Quick Links
MAKING MODERN LIVING POSSIBLE
Manual
Application for configuring the EIM 316/336 using MMIMyK
Type EIM 316/336 interface
Features
© Danfoss A/S (AC-MCI/sw), 2014-03
ƒ Configure EIM parameter
ƒ Display setting
ƒ Read out of status and parameters
ƒ Manual control of the valve
This application allows the user to configure
the EIM316/336 parameters and display
settings and readouts. In addition it supports
a manual control mode to enable direct
control of the valve opening degree.
DKRCC.PS.RQ0.C2.02 / 520H8422
Advertisement
Table of Contents
Related Manuals for Danfoss EIM 316
Summary of Contents for Danfoss EIM 316
- Page 1 MAKING MODERN LIVING POSSIBLE Manual Application for configuring the EIM 316/336 using MMIMyK Type EIM 316/336 interface This application allows the user to configure the EIM316/336 parameters and display settings and readouts. In addition it supports a manual control mode to enable direct control of the valve opening degree.
-
Page 2: Table Of Contents
Manual EIM 316/336 interface application for setup and configuration of MMIMyK Contents Page 1. Introduction................4 2. -
Page 3: References
Manual EIM 316/336 interface application for setup and configuration of MMIMyK 2. References http://www.danfoss.com/MCX MyK Manager (A password and login are needed in order to download the application) http://dila.danfoss.net/literature/dkrc/AC-E-IT_MMIMYK_DKRCC.PI.RJ0. MMIMyK Instruction B1.1U_520H5326_Low.pdf MMIMyK software http://dila.danfoss.net/literature/dkrc/AC-E-IT_MMIMYKSwDownload- download guide Guide_DKRCC.PS.RJ0.B1.02_520H5547_Low.pdf http://dila.danfoss.net/literature/dkrc/ITDE_GD_MMIMYK_RS8FP202_EN. MMIMyK Manual 3. -
Page 4: Starting The Application
Manual EIM 316/336 interface application for setup and configuration of MMIMyK 5. Starting the The MyK will startup in its Bios menu if no containing the application and press the enter application has previously been loaded. From button. The application should load automati-... -
Page 5: Alarm Screen
Manual EIM 316/336 interface application for setup and configuration of MMIMyK 6. Using the 6.2 Alarm screen briefly will exit to the main screen without The alarm screen shows the alarms that have still acknowledging the alarm. application not been acknowledged. If more than one alarm... -
Page 6: Parameters
Manual EIM 316/336 interface application for setup and configuration of MMIMyK 6.5 Parameters displayed instead of the value. The MyK Setup This is a list of the available parameters of the and Password menus relate to the MyK applica- MyK application. The parameters in the Control, tion itself. - Page 7 Manual EIM 316/336 interface application for setup and configuration of MMIMyK 6.5 Parameters (continued) Group1 Group2 Parameter Description Default Units Level Notes LOC Trig LOC Reset LOC Timer 7200 3600 LOC SH Trig 50.0 20.0 Setup Modbus Unit Addr Unit Addr 2 MB Baud 96;192;384...
-
Page 8: Manual Control
Manual EIM 316/336 interface application for setup and configuration of MMIMyK 6.6 Manual control After setting the manual control mode to on, The valve can be opened and closed by manually press enter to accept the change. It is now... -
Page 9: Service Functions
Manual EIM 316/336 interface application for setup and configuration of MMIMyK 6.8 Service functions factory defaults. This means that if a factory reset Two service functions are available, resetting to is performed, these are the settings that will be factory default settings, and setting factory used. -
Page 10: Alarm
Manual EIM 316/336 interface application for setup and configuration of MMIMyK 6.10 Alarm The read alarm screen displays a list of the currently active alarms reported from the connected EIM. The status of 8 different alarms are reported back from the EIM. A 0 (zero) means that the alarm is not active, a 1 means that the current alarm is active.