Initial Setup - Ikegami HLE-2153G Operation Manual

■ First Steps
When the monitor is powered on and connected to your source,
1
Selecting Input
2
Menu Control
- Press the main jog on the front of the monitor for 2 seconds to enter or exit the menu
- Turn the jog to move around the menu
- Click the jog to make your selection
- Main jog allows users to move one step at a time. If you wish to move back to previous step in the menu, press
the jog for two seconds. If you want to exit the menu and restart, press exit button depending on where you are in
menu tree
3
Function key
HLE-2153G
F1 UMD Type
F3 Waveform
F5 Blue/Mono
F7 SDI Output
- Users can program 8 function buttons on the front by
▶
MENU
- All features in the monitor can be programmed in one of these keys

Initial Setup

- To select your source, please press SOURCE button
- Turn the main jog to make your selection, and click the jog to select
- Factory default is SDI. Please skip this step if you are connected to SDI source
Factory default setting for programmable keys on the front of the monitor
▶
Function Key Function Key #
F2 Marker
F4 Vectorscope
F6 H/V Delay
F8 HDMI Output
7