Creating Your Own Program (Program Play) - Sony CDP-CX153 Operating Instructions Manual

Playing CDs
You can go to the next disc during 1 DISC Shuffle Play
Press DISC SKIP +.
You can specify the next disc to play during 1 DISC
Shuffle Play
Turn the JOG dial to specify the next disc. After all the
tracks on the current disc are played in a random order,
the next disc starts playing. If you want to skip to the
next disc right away, press ENTER while playing the
current disc.
Notes
• You cannot specify the next disc to play during ALL DISCS
Shuffle Play.
• Even if you press p or turn off the player during ALL
DISCS Shuffle Play, the player remembers which discs/
tracks are played and which are not. Therefore, if you want
to start ALL DISCS Shuffle Play again from the beginning,
be sure to repeat the procedure from Step 1.
EN
14
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks and/or discs
and create 3 different programs and programs are
stored automatically. A program can contain up to 32
"steps" — one "step" may contain a track or a whole
disc.
The programs are stored in the player's memory for
about a month with the power turned off.
You can make programs using the controls on the
remote as well as ones on the player. However, the
programming procedures are different.
Creating a program using the player
PROGRAM
1
Press PROGRAM until the program number you
want (PROGRAM 1, 2 or 3) appears in the display.
If a program is already stored in the selected
program number, the last step of the program
appears in the display. When you want to erase the
whole program, hold down CLEAR until "ALL
CLEAR" appears in the display (see page 16).
2
Turn the JOG dial until the disc number you want
appears in the display.
DISC TRACK
2 0 A L
PROGRAM 1
Disc number
3
To program a whole disc, skip this step. Press
≠/± until the track number you want
appears in the display.
DISC TRACK
2 0 3
PROGRAM 1
Track number
ENTER JOG
· ≠/±
CLEAR
STEP
1
CD 1
STEP
1
CD 1