Call Pick-Up; Callback Request; Do Not Disturb (Dnd) - NEC Ranger AK Manual

Call Forwarding
You can use call forwarding to forward your calls to another telephone.
To set call forwarding, do the following with the station idle.
•
Press the FNC button
•
Dial 60
•
Enter the destination station number
•
Press the FNC button
To cancel call forwarding, repeat the above process.

Call Pick-Up

• You can use call pickup to answer an incoming external or internal call not
ringing at your handset.
• Lift the handset
• Dial the access codes, as below:
o 60 - For external call pick-up in different group
o 61 - For intercom call pick-up in same group
o 62 - For CO call pick-up in same group

Callback Request

To Set
After calling another station and receive a call waiting tone, busy tone or no answer:
•
Press #
•
Receive confirmation tone OR receive error tone if denied.
•
Restore the handset
To Answer
Your FNC LED will be flashing. If you have a display phone you may also receive
notification on the LCD.
o Lift the handset
o Press #

Do Not Disturb (DND)

Do Not Disturb is a feature of the NEC Ranger system that allows you temporarily
block incoming calls whilst still being able to make outgoing calls.
This feature is useful in scenarios such as meetings where you do not wish to be
interrupted by the sound of the phone ringing.
6